AcQ Inducom Products

Homepage AcQ

• 1 Mbits/sec maximum data rate
• RS232 / RS422 / RS485 and 20mA current-loop (TTY) modes independently selectable per channel
• Hardware handshake (RTS/CTS) for point-to-point transmission modes (RS232 / RS422)
• Line-break detection and generation
• Baudrates independently programmable per channel
• M301 product

• Onboard MC68332 runs intelligent firmware
• Transmit channels
• Receive channels
• Transmit and receive commands for specific labels
• 16 user selectable labels for interrupt generation upon reception
• Status and statistics monitoring for all channels
• Adjustable data rate from 12.5 to 100kbps
• ARINC-429 rise/fall capacitors selectable per channel
• Provides a platform for an ARINC-429 protocol analyser with additional software
• M302 product

• Flexible platform allows easy addition of user-specific requirements
• 2 transmit channels, 2 receive channels
• Data rate software adjustable between 12.5 and 100kbps per channel
• 16 User-selectable labels for interrupt generation upon reception
• Status and statistics monitoring for all channels
• ARINC-429 rise/fall capacitors selectable per channel
• Provides excellent platform for ARINC-429 protocol analyses
• PCI302 product

• Flexible platform allows easy addition of user-specific requirements
• 2 transmit channels, 2 receive channels
• Data rate software adjustable between 12.5 and 100kbps per channel
• 16 User-selectable labels for interrupt generation upon reception
• Status and statistics monitoring for all channels
• ARINC-429 rise/fall capacitors selectable per channel
• Provides excellent platform for ARINC-429 protocol analyses
• CPCI302 product

• Flexible platform allows easy addition of user-specific requirements
• 8 transmit channels, 8 receive channels
• Data rate software adjustable between 12.5 and 100kbps per channel
• 16 User-selectable labels for interrupt generation upon reception
• Status and statistics monitoring for all channels
• ARINC-429 rise/fall capacitors selectable per channel
• Provides excellent platform for ARINC-429 protocol analyses
• VME302 product

• Intel i8044 BEM (Bitbus Enhanced Microprocessor)
• Command and status registers mapped
• Synchronous BITBUS interconnect at 3 bitrates of up to 2.4 Mbps
• Optical isolation according to VDE884
• Optional isolated supply (+12VDC) supplied by the network
• 10 pole flatcable connector at module front
• Identification EEPROM
• M304 product

• Single-ended SCSI-2 interface featuring the Am53C94 High Performance Enhanced SCSI-2 controller
• SCSI-2 speed up to 5 Mbytes/s, DMA speed up to 20 Mbytes/s
• Active SCSI-2 terminators on-board
• SCSI interface supports 16-bit DMA and pseudo-DMA transfers
• 16 byte FIFO in SCSI controller
• SCSI controller features Disconnect/Reselect commands, 3 byte tagged queuing and group 2 and 5 command recognition
• IOMEGA / Macintosh-compatible SCSI connector (25 pole sub-D)
• M305 product

• Multi-master architecture on the CAN network
• CAN access priority determined by message identifier
• Programmable network clock frequency
• Data rate up to 1 Mbps
• Status indication by two LEDs at front
• Transmit and receive FIFO buffer
• Full interrupt capabilities
• High-speed isolated ISO11898 compliant transceiver
• TTL level signals Tx0, Tx1, Rx0 and Rx1 available on output for custom physical network interface
• Supports both 11-bit and 29-bit identifier fields
• CPCI360 product

• CAN access priority determined by message Identifier
• Programmable network clock frequency
• Data rate up to 1Mbps
• Status indication by two LEDs at front
• Transmit and receive FIFO buffers
• Full interrupt capability
• High-speed isolated ISO11898 Compliant transceiver
• TTL level signals Tx0, Tx1, Rx0 and Rx1 available on output for custom physical network interface
• Supports both 11-bit and 29-bit identifier fields
• M360 product

• Multi-master architecture on the CAN network
• CAN access priority determined by message identifier
• Programmable network clock frequency
• Data rate up to 1 Mbps
• Status indication by two LEDs at front
• Transmit and receive FIFO buffer
• Full interrupt capabilities
• High-speed isolated ISO11898 compliant transceiver
• TTL level signals Tx0, Tx1, Rx0 and Rx1 available on output for custom physical network interface
• Supports both 11-bit and 29-bit identifier fields
• PCI360 product

• Multi-master architecture on the CAN network
• CAN access priority determined by message identifier
• Programmable network clock frequency
• Data rate up to 1 Mbps
• Status indication by LEDs at front
• Transmit and receive FIFO buffers
• Full interrupt capabilities
• High-speed isolated ISO11898 compliant transceivers
• TTL level signals Tx0, Tx1, Rx0 and Rx1 available on output for custom physical network interface
• Supports both 11-bit and 29-bit identifier fields
• VME360 product

• PowerQUICC II
• 32-bit PCI bus @ 33MHz or 66 MHz
• 4x CAN interface, MCP2515
• 4 x Independant CAN 2.0B, ISO11898 interfaces
• PMC408 product

• PowerQUICC II
• 32-bit PCI bus @ 33MHz or 66 MHz
• 4x CAN interface, MCP2515
• 4x Independant CAN 2.0B, IS11898 interfaces
• ccPMC408 product

• Single PMC slot (IEEE 1386.1-2001) with front I/O and rear I/O
• Optional PIM450 (VITA 36) for rear I/O connections
• Xilinx FPGA softcore PCI interface
• 16C550 compatible host interface
• FIFO Depth 16 bytes
• Communication parameters 115Kb
• PCI interface: PCI2.1 compliant, 33MHz, 32-bit interface, 3.3V and 5V signalling supported, 5V supply
• 8 serial RS422 channels with Rx, Tx, RTS and CTS at 68-pin front or 64-pin rear connector
• Dipswitch selectable line termination
• PMC450 product