|
AcQ Inducom Products
|
 |
| |
Homepage AcQ |
| Carriers | Datacommunication | Parallel/Binary I/O | Motion Control | Analog, with or without DC/DC | Special Functions | Systems | MIL-STD/STANAG | FPGA Modules |
| |
|
| Carriers |
Top |
| |
i2001 M-module Carrier for PCIbus |
 |
- PCI Specification 2.2 Compliant Target Interface
- Operating voltage 5V universal PCI compliant (3.3V or 5V signalling voltage)
- M-module interface runs asynchronously to the PCI Clock
- One M-module interface (A08/A24, D16/D32)
- Configurable for memory-mapped and I/O-mapped operation
- i2001 product
|
| |
|
| Carriers |
Top |
| |
i3000 M-module Carrier for CompactPCI (3U) |
 |
- PCI Specification 2.1 Compliant Target Interface
- M-module interface runs asynchronously to the CompactPCI Clock
- Supports big/little endian conversion
- One M-module interface (A08/A24, D16/D32)
- Configurable for memory-mapped and I/O - mapped operation
- i3000 product
|
| |
|
| Carriers |
Top |
| |
i3002 M-module Carrier for CompactPCI (3U) |
 |
- 5V and 3.3V signalling voltage (VIO) supported
- 5V only power supply
- 33MHz PCI data bus
- Two M-module Interfaces (A08/A24, D16/D32, TRIGI, TRIGO)
- INTA software-end-of interrupt
- CompactPCI Specification 2.0 R3.0 Compliant
- i3002 product
|
| |
|
| Carriers |
Top |
| |
i3100 M-module Carrier for CompactPCI (6U) |
 |
- PCI Specification 2.1 Compliant Target Interface
- Bi-directional FIFO for zero waitstate burst operation
- M-module Interface runs asynchronously to the CompactPCI Clock
- Supports Big/Little Endian Conversion
- 4x M-module interface (A08/A24, D16/D32)
- Configurable for Memory-mapped and I/O -mapped Operation
- INTA software-end-of interrupt supported
- Temperature range -20°/+70°C
- i3100 product
|
| |
|
| Carriers |
Top |
| |
i4000 M-module Carrier for VMEbus (6U) |
 |
- Features 4 M-module slots
- Occupies only one VMEbus slot
- Selectable short or standard VMEbus addressing (A16/A24) with byte (even/odd) or word data transfers (D08(E/O)/D16)
- Programmable interrupt controller with D08(O) interrupter characteristics
- Separate interrupt vector available for each (M-module) slot
- Peripheral I/O Connections up front or via P2 connector
- i4000 product
|
| |
|
| Carriers |
Top |
| |
i4001 M-module Carrier for VMEbus (3U) |
 |
- Features one M-module slot
- Occupies one 3U VMEbus slot
- Selectable short or standard VMEbus addressing (A16/A24) with byte (even/odd) or word data transfers (D08(E/O)/D16)
- Programmable interrupt controller with D08(O) interrupt vector and I(x) interrupt level characteristics
- Peripheral I/O connectors up front
- i4001 product
|
| |
|
| Carriers |
Top |
| |
i4400 Low-cost 6U form factor PMC/PrPMC carrier for VMEbus (VME64/VME64x) |
 |
- VMEbus to PCI-bus interface implemented in FPGA
- Selectable standard VMEbus addressing (A24) with byte
- (Even/odd) or word data transfers (D08(E/O)/D16/D32)
- Features 2 single or 1 double PMC
- 33 MHz/32-bit PCI interface to PMC modules
- 3.3V PCI signaling on PMCs
- Support for one ANSI/VITA 32-2003 compliant Processor PMCs
- Rear I/O on P2 or optional P0 connector
- Available in 3-row and 5-row VME with optional P0
- Software selectable interrupt level
- Thermal sensor for each PMC site
- Front panel status display
- Conduction cooling (optional)
- i4400 product
|
| |
|
| Carriers |
Top |
| |
i5001 M-module Carrier for USB 2.0 and USB ExtensionBox |
 |
- Single M-module slot with front I/O
- Cypress EZ-USB SX2(TM) Controller
- USB 2.0 interface
- USB plug&play
- direct access to M-module memory space
- direct M-module interrupt control
- high-performance interface between the USB (SX2 Chip) and the M-module using an FPGA for direct control
- only 1 supply voltage (+12V) using onboard DCDC converters
- i5001 product
|
| |
|
| Carriers |
Top |
| |
i5500 Ethernet M-module carrier, wired |
 |
- Supports two ANSI/VITA 12-1996 compliant single-wide M or MA-modules or one double-wide module
- Ethernet 10Base-T, 100Base-TX (Auto-Sensing)
- Rugged steel/aluminium enclosure (W: 14.22cm; D: 21.59cm; H: 3.81cm)
- +12V power input through standard 2.5mm jack or 9-pin DSUB
- Variable speed forced air cooling with software temperature status
- D16 M-module accesses supported
- Flexible block access command provides rapid sequential and FIFO data accesses
- External trigger input/output and inter-module triggers supported
- Isolated and filtered +5V, +12V, and 12V supplies for each M-module
- Interactive Mezzanine Control (IMC) software available
- i5500 product
|
| |
|
| Carriers |
Top |
| |
i5500 Ethernet M-module carrier, wireless |
 |
- Supports two ANSI/VITA 12-1996 compliant single-wide M or MA-modules or one double-wide module
- Ethernet 10Base-T, 100Base-TX (Auto-Sensing)
- Rugged steel/aluminium enclosure (W: 14.22cm; D: 21.59cm; H: 3.81cm)
- +12V power input through standard 2.5mm jack or 9-pin DSUB
- Variable speed forced air cooling with software temperature status
- D16 M-module accesses supported
- Flexible block access command provides rapid sequential and FIFO data accesses
- External trigger input/output and inter-module triggers supported
- Isolated and filtered +5V, +12V, and 12V supplies for each M-module
- Interactive Mezzanine Control (IMC) software available
- i5500 product
|
| Carriers | Datacommunication | Parallel/Binary I/O | Motion Control | Analog, with or without DC/DC | Special Functions | Systems | MIL-STD/STANAG | FPGA Modules |
